Home | My Blog | Help  

My Open Blog

Typical Situation in Silkroad

Blog: Successful Thieving From Level 20 to 30 in Silkroad
 

Welcome to Sro18. We got the information in Silkroad which from other website, we sincerely hope it can help you more or less. Wish you have a good day!


Before you continue, read and answer the following, do you have a hub/switch in place? Or are both PC's seperately, but directly, connected to the router? Both cases are a relatively easy fix, as long as you know what you are doing. Your ISP configures all their routers using NAT because the world is running short on IP adresses. NAT simply means - your network gets 1 IP. NAT allows a network to communicate to the outside via your router, with only 1 IP. This happens especially with small providers as they are basically ordered to let their DHCP servers grant a smaller amount of IPs to their customers, whereas big providers do not have this problem very often. It gets more complicated though when one talks about NAT more deeply and goes into the subject of ports, but that is not really needed. We provide Silkroad Gold for you.


So in some cases, like here, it can be annoying with a game(SRO Gold) where you can not connect together, because their servers see both of your computers as 1. Instead of giving your network of 2 PC's multiple IP's, the router is configured to open ports. If possible. Super easy fix: call your ISP and ask them if it is allowed to adjust NAT. If yes then they will walk you through it - explain the situation. We highly doubt they will not allow you as you will have this problem with a lot of games and a lot of other things too. Easy fix : Configure NAT yourself. For this all you need to tell us is the make of your modem-router and we could post it for you using a manual we will find on google. If you can not decide, we would personally just do it.


Thank you for your reading. You can buy the cheapest Silkroad powerleveling service from our website, please contact with us if you need.

 

 






Comments (0)

There are no comments for this article yet.


Leave your comment

Please Log In to leave a comment.

Still not a member?
Register Now and have your blog for free in few minutes.